MACHINE ROOM
Geared Machine, this is the power unit of the eletator and usually located at the elevator machine room. The Geared machine used to refer to the collection of components that raise or lower the elevator. These include the drive motor, brake, speed reduction unit, sheaves and encoders.
MACHINE ROOM LESS
Gearless Machines are used for high speed lifts between 1.5 m/s to 10 m/s and ther can be also used for lower speeds for special applications. Their sizes and shapes vary with load, speed and manufacture but the underlying principles and components are the same.
ELEVATOR CONTROL PANEL
- SMD designed, microcontroller based Main Control board.
- Optically isolated inputs and outputs with LED indication.
- The SMART Controller can be interfaced with any VVVF drive.
- Seven segment display provided on main control board for parameter programming and Field test.
- On line operation status.
- Fault diagnosis resulting in minimum down time in any maintenance. Auto fan system.
- We provide separate motor contractor, brake contractor R-cam contractor.
- FM, Home landing system.
- Status of all inputs and Outputs through LED indication on Main Control board.
ARD CONTROLLER
Smart rescue is based on intelligent micro controller with Integrated Circuits and Power MOSFETS/ IGBTS. The smart Rescue comprises of three-phase low voltage and low frequency to the motor and single phase for brake and door drive with switch mode power supply for batteries to boost and float charging. When power fails ARD will detect and will start the lift in slow speed checking all safeties with load sensing to the nearest floor.
DRIVES
We Provide a wide range of V3F Drive that is extensively used in elevators & escalator. V3F drives are used for the accelaration and deaccelrations of the lifts. 50% energy is saved by these V3F drives. V3F drives is used to upgrade the lifts.
BIOMETRIC ACCESS CONTROL SYSTEM
Elevator sector needs to intensify security by choosing an optimum elevator access control system users can be assigned to have access to certain floors for allotted period of time. Access can be controlled by either RIFD cards or advanced credentials such as PIN, Fingerprints and QR code, it can be applied at entry/exit doors, Elevator Control System can grant or deny access based on user classification or time based.
Voice Announcement
Has been widely used in elevator floor announcement, floor voice navigation, sightseeing elevator/ cable car specific scenic spots, public security warning and other occasions.
Overload Sensor
The ILC2 intelligent wire rope sensor provides the most easily and precise method to control the load in traction Elevators. It’s easy installation (5 min) and calibration through the diameter of the ropes makes it perfect device for modernizations as well as for new installation.
